9100 INTEGRATED AMPLIFIER

Function should come before frills and the PLINIUS 9100 exemplifies this notion.

It is a purpose built design where each material or component choice has been made always aiming for the maximum possible performance.

Power is an important part of this amplifier's character and with a generous 120 Watts per Channel the 9100 should satisfy even the most demanding applications. In fact you may never approach the maximum output of the 9100 but if required there is comfort in the fact that it is there and available. The circuit of the 9100 is based on the PLINIUS Odeon Amplifier Module and shares the much praised PLINIUS House sound.

The 9100 is a specialist amplifier ready to combine with the abilities of a new generation of components from specialists around the world. It will prove revealing of any improvements made at source in a system and has the ability to drive any worthwhile loudspeakers with authority and finesse.

Although designed primarily for high quality reproduction of music, the 9100 will enhance the performance of both home theatre and multi-room systems by virtue of its flexible design.

9100 Brochure Information (1,126K)

9100 Review - Haute Fidelite (1,991K)

PRODUCT SPECIFICATIONS



Power:	120 Watts RMS per channel into 8 Ohms. Both channels driven from 20Hz to 20kHz at less than 0.1% total harmonic distortion
Frequency Response:	20Hz to 20kHz ± 0.2dB. 0dB at 0Hz and -3dB at 70kHz
Distortion:	Typically <0.05% THD at rated power. 0.1% THD & IM worst case prior to clipping
Current Output:	20A short duration peak per channel. Fuse protected
Slewing:	50V/us
Hum & Noise:	90dB below rated output 20Hz to 20kHz unweighted
Input Sensitivity:	290mV RMS for rated output at 1kHz
Input Impedance:	47k Ohms
Input Overload:	5V RMS
Rated Pre Out Level:	1.5V RMS into 47k Ohms or higher
Pre Out Source Impedance:	Typically 1.5k Ohms
Pre Out Minimum Recommended Load:	47k Ohms
Tape Output Level:	Unity Gain at 200mV. Tape loop muting at 5V RMS input
Dimensions:	Height 105mm (4"), Width 450mm (17.75"), Depth 400mm (15.75"), Weight 10kg (22lb)



N O T E : Technical descriptions and specifications subject to change at any time without notice.